預制箱涵模具制作-臥式箱涵模具-立式箱涵模具可多次翻模

預制箱涵模具制作-臥式箱涵模具-立式箱涵模具可多次翻模

預制件構件模具安裝應考慮以下規定:1模具安裝前務必開展清除，模具內表層清除時不可應用銅器清刮，清除后的模具內表層的一切位置不可有殘余臟物;2模具安裝應按模具安裝計劃方案規定的次序開展;3固定不動在模具上的埋件、預埋孔應部位準、安裝堅固，不可忽略;4模板安裝時要扭緊地腳螺栓，并扭緊至堅固，防止在混凝土澆筑全過程中造成彎折、傾斜;結合當代人自主創變新活觀念和的核心理念，大家以不銹鋼板材和混凝土為主要元素，另外出示的市場銷售與售后維修服務愿與業內盆友真心實意協作，攜手同行，共商發展趨勢。

The following provisions shall be taken into consideration when installing the mold of prefabricated components: 1. The mold must be removed before installation, and the inner surface of the mold shall not be cleaned with copper tools. All positions of the inner surface of the mold after removal shall be free of residual dirt; 2 The mold installation shall be carried out in the order specified in the mold installation plan; 3 The embedded parts and embedded holes fixed on the mold shall be accurate and firmly installed, which cannot be ignored; 4 During the installation of formwork, the foundation bolts shall be tightened to be firm to prevent bending and inclination during the whole process of concrete pouring; In combination with the core concept of independent innovation and innovation of contemporary people, we take stainless steel plates and concrete as the main elements, and we are willing to sincerely cooperate with friends in the industry in terms of market sales and after-sales maintenance services.

箱涵加工過程完成了單一化、規范化和現代化。生產制造高效率，漯河箱涵模具，質量管理平穩。插口選用遇水后澎漲橡膠圈密封性，每四節方涵拼裝成一組，用預應力鋼筋鋼鉸線開展張-緊、抗地基沉降、承重、防潮特性優良，當場工程施工安裝操作方便快捷。

The box culvert processing process has been simplified, standardized and modernized. Production efficiency, Luohe box culvert mold, stable quality management. The spigot shall be made of rubber rings that swell after encountering water. Every four square culverts shall be assembled into a group. The prestressed steel hinge wire shall be used to carry out tension tension, resistance to foundation settlement, bearing and moisture resistance. The on-site construction and installation of the project shall be convenient and fast.