多孔電力電纜管鋼模具介紹

多孔電力電纜管鋼模具介紹電纜管模具因為孔洞的數量不同，所以在操作過程中只要是制作出來相應形狀的孔洞就可以了，把所有的模具都制作出來以后，然后再對數量清點一遍，把模具的數量都表格式的詳細的記錄好，把模具的情況都記錄好以后，在下次需要對模具進行應用的時候直接的就能找到相應的位置，倉庫需要及時的進行檢查與清理，對模具的情況也需要做到非常的了解

Due to the different number of holes in the cable duct mold, it is enough to make holes of corresponding shape during the operation. After all the molds are made, count the quantity again, and record the mold quantity in tabular format in detail. After recording the mold conditions, you can directly find the corresponding position when you need to apply the mold next time, The warehouse needs to be checked and cleaned in time, and the mold needs to be well understood

多孔電力電纜管鋼模具介紹電纜管模具通常采用預制的施工方法，首先需要將模具的部件組裝起來，如果模具已經使用了很長時間，就需要檢查模具的完整性，需要更換的零件及時更換，然后將模具的內壁均勻的涂抹脫模劑，也需要將PVC管都涂抹上，然后將事先攪拌均勻的泥漿注入模具內，振搗后等待定型后拆下PVC管和模具

Prefabrication construction method is usually adopted for the cable pipe mold. Firstly, the components of the mold need to be assembled. If the mold has been used for a long time, the integrity of the mold needs to be checked, and the parts that need to be replaced need to be replaced in time. Then, the inner wall of the mold needs to be evenly coated with release agent, and the PVC pipes also need to be coated. Then, the mud mixed evenly in advance should be injected into the mold, and the PVC pipe and mold should be removed after vibrating and waiting for finalization